Task 3: Frame and Suspension
Assembly time ≈ 30 minutes
Step 1
note
Make sure that the screw is tight, but pushrod can move without excess play and resistance.
info
Repeat until you have 2 suspension mounts.
Step 2
info
Repeat the steps until you have 2 suspension mounts.
Step 3
Step 4
Step 5
note
Make sure that the screw is tight, but differential bar can move without excess play and resistance.
Step 6
Step 7
note
Do not overtighten the screws.
Make sure that washers and nuts are concentric with the
bearings.
Make sure that rocker mounts
can move without excess play and resistance.
Step 8
Step 9
